Seastar Solutions Optimus 360 User Manual download pdf (Page 24)

5.0 CONTROL HEAD OPERATION

Be very cautious when ﬁrst engaging the gears to establish that

forward is truly forward and reverse is truly reverse. A quick in-and-

out of gear test is recommended. Ensure that the boat is clear of all

obstacles forward and aft before conducting this test.

The control head is the primary user interface for conventional shift

and throttle controls.

On single control station boats, when the ignition is turned on, the

blue Take Command light will illuminate, indicating that the control

head is active. If the control levers are not in neutral, both neutral

indicator lamps will ﬂash red.

On multi-control station boats, when the ignition is ﬁrst turned on,

the control head “Smart Select” feature will automatically activate

the control head if the levers are moved out of the neutral position.

Alternately, pushing the Take Command button with the control

handles in the neutral position will activate the desired station.

When in joystick mode, the control head will become inactive and all

lamps will go out. The control head can be re-activated at any time

by pressing the Take Command button with the control handles in

the neutral position.

When transferring between joystick and control head, the control

head will remember any special features such as sync mode, which

may have been active prior to entering joystick mode.

The EST Quick Reference Guide provides a summary of the control

head operation and should be kept on the vessel at all times.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 75 76

No comments

Seastar Solutions Optimus 360 User Manual Page 24