Seastar Solutions Optimus 360 User Manual download pdf (Page 48)

1. Check steering ﬂuid level in all steering pumps.

Each Optimus 360 hydraulic pump has a steering ﬂuid reservoir.

Ensure the ﬂuid level is between the MIN and MAX marks on

the reservoir as shown in the ﬁgure below. Use only SeaStar

Electronic Power Steering Fluid in the Optimus 360 System.

Failure to adhere to these warnings may result in loss of boat

control, leading to possible ejection from vessel; causing property

damage, personal injury and/or death.

8.3 System Inspection

2. Verify immediate steering response when turning steering

wheel(s).

Turn the steering wheel slowly to port and to starboard and make

sure the engines follow the commands. Watch that the hoses

harnesses, and cables move freely without any snags or hang-

ups.

3. Inspect all steering hoses, ﬁttings and mechanical and

electrical harness for wear, kinks, or leaks.

Check all steering hoses and ﬁttings between the pump, service

valves and cylinders for any signs of leakage, kinking, wear or

chaﬁng. Check all electrical harnesses and mechanical cabling

for abrasion, wear, rubbing or chaﬁng. Check that all connections

are tight and free of corrosion.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 75 76

No comments

Seastar Solutions Optimus 360 User Manual Page 48